Menu
Cart 0
SAMSUNG M393B1G70QH0-YK0 SAMSUNG 8GB 1RX4 PC3L-12800R

SAMSUNG M393B1G70QH0-YK0 SAMSUNG 8GB 1RX4 PC3L-12800R

  • $59.97

Conditions guide

100% Genuine- Computer/Laptop Replacement or Internal parts
Part Number: M393B1G70QH0-YK0
M393B1G70QH0-YK0
8GB Memory Module
DDR3-1866MHz
PC3-14900
ECC Registered
1.5v
CL13
240-pin
1Rx4 Single Rank

NON-ECC / Non-parity - Most desktop and laptop computers take NON-ECC or Non-parity memory.

ECC / Parity - ECC or parity modules look for errors in data and are most often found in servers and other mission-critical applications used by large networks and businesses.

Unbuffered - Most PCs and workstations use unbuffered memory which is faster than registered memory.

Registered / Buffered - Registered or buffered modules delay all information transferred to the module by one clock cycle. This type of memory is primarily used in servers.

Fully Buffered - Designed for next-generation servers, features an advanced memory buffer.

CL - CAS (column address strobe) latency, which is the number of clock cycles it takes before data starts to flow after a command is received. Lower CL is faster. Modules with different CL can be mixed on a system, but the system will only run at the highest (slowest) CL.

Voltage - For example 1.5V Indicates the power used by the module. The lower the better.

Standard Voltage (SV) DDR3 operates at 1.5 volts, which is currently required for 1866 million transfers per second (MT/s).

Low Voltage (LV) DDR3 operates at 1.35 volts or 1.5 volts. At 1.35 volts the memory can consume less power and reduce heat, but can still be boosted to 1.5V when the memory channel requires additional voltage to help maintain maximum speed. With the introduction of our 13th-generation servers.

DDR4 operates at 1.2 volts. The voltage decrease from DDR3 allows for lower active and standby power usage.

UDIMM is an unbuffered, low-density, low-latency DIMM that doesn't include a register or a buffer chip.